"10 prong" style rings (pictured on the right side of the graphic)

There are three basic representations of balance for the classic three stone "Past, Present & Future" DeBeer's style 3 Stone rings as pictured along the right side of the graphic above.  The most common representation of balance is pictured (in platinum) at the top right side of the graphic.  The ratio of the accent diamonds to the center stone is approximately one half the size, such as a one carat center stone with half carat accents.

The second variation incorporates accent diamonds which are three fourths the size of the center stone, such as a one carat center stone with accent diamonds which weigh approximately 0.75 carats each (pictured second in from the middle right).

The third variation incorporates accent diamonds which are one third the size of the center stone, such as a one carat center stone with accent diamonds weighing 0.33 carats each (pictured in the middle of the graphic along the right edge).
 

Platinum "10 prong elegant" setting as pictured in the upper right hand corner of the graphic above.  The mounting starts at  $1,265.00* which includes the labor to set all three stones if those diamonds are selected from our Private Reserve.

This ring style is available to accommodate the following combinations of ring sizes only:

1. The center stone measures approximately 4.10 mm which would be about a 0.26 - 0.28 carat round with the accents measuring approximately 3.2 mm which would be about 0.12 carats each with some very minor variance being allowed by the prong structure.

2. The center stone measures approximately 4.20 mm which would be about a 0.27 - 0.29 carat round with the accents measuring approximately 3.8 mm which would be about 0.20 carats each with some very minor variance being allowed by the prong structure.

3. The center stone measures approximately 6.00 mm which would be about a ninety point round with the accents measuring approximately 5.0 mm which would be about 0.45 carats each with some very minor variance being allowed by the prong structure.

4. The center stone measures approximately 7.00 mm which would be about a 1.30 carat round with the accents measuring approximately 5.5 mm which would be about 0.0.60 carats each with some very minor variance being allowed by the prong structure.

5. The center stone measures approximately 8.2 mm which would be about a two carat round with the accents measuring approximately 6.5 mm which would be about 1.00 carats each with some very minor variance being allowed by the prong structure.
    

18k yellow gold "3 stone with a flair" setting with platinum prongs, the mounting starts at $865.00* which includes labor to set all three stones if those diamonds are selected from our Private Reserve.  The ring style is as pictured in the bottom center of the graphic above, but the concept of the combination of metals is like the ring pictured second from the bottom right of the graphic...  Use your imagination until we get the picture up.

14k yellow gold "3 stone with a flair" setting with white gold prongs, ;the mounting starts at $485.00* which includes labor to set all three stones if those diamonds are selected from our Private Reserve.  The ring style is as pictured in the bottom center of the graphic above, but the concept of the combination of metals is like the ring pictured second from the bottom right of the graphic...  Use your imagination until we get the picture up.

14k yellow or white gold "3 stone with a flair" setting with yellow or white gold prongs, the mounting starts at  $485.00* which includes labor to set all three stones if those diamonds are selected from our Private Reserve.  The ring style is as pictured in the bottom center of the graphic above, but the concept of the combination of metals is like the ring pictured second from the bottom right of the graphic...  Use your imagination until we get the picture up.

Platinum "3 stone 3mm" setting, the mounting starts at $1,265.00* which includes labor to set all three stones if those diamonds are selected from our Private Reserve.  Pictured in the lower left corner of the graphic above.  This very comfortable ring can be made to fit a variety of stone sizes.  The ring has a very low profile.

18k yellow gold and Platinum two-tone "3 stone 3mm" setting, the mounting starts at $865.00* which includes labor to set all three stones if those diamonds are selected from our Private Reserve.  The ring style is as pictured in the lower left corner of the graphic above, but the ring shank is 18k yellow gold and the center section which holds the diamonds is platinum.  Pictured in the lower left corner of the graphic above.  This very comfortable ring can be made to fit a variety of stone sizes.  The ring has a low profile.

14k two-tone "3 stone 3mm" setting, the mounting starts at $560.00* which includes labor to set all three stones if those diamonds are selected from our Private Reserve.  The ring style is as pictured in the lower left corner of the graphic above, but the ring shank is 14k yellow gold and the center section which holds the diamonds is 14k white gold.  This comfortable ring can be made to fit a variety of stone sizes.  The ring has a low profile.

14k yellow gold "3 stone 3mm" setting, the mounting starts at $560.00* which includes labor to set all three stones if those diamonds are selected from our Private Reserve.  The ring style is as pictured in the lower left corner of the graphic above, but the ring shank is 14k yellow gold and the center section which holds the diamonds is also 14k yellow gold.  This comfortable ring can be made to fit a variety of stone sizes.  The ring has a low profile.

14k white  gold "3 stone 3m" setting, the mounting starts at $560.00* which includes labor to set all three stones if those diamonds are selected from our Private Reserve.  The ring style is as pictured in the lower left corner of the graphic above, but the ring shank is 14k white gold and the center section which holds the diamonds is also 14k white gold. This very comfortable ring can be made to fit a variety of stone sizes.  The ring has a low profile.

* All prices are for the blank mount and labor to set the diamonds only if the diamonds are purchased from our company, all diamonds are additional, please visit our Private Reserve for a list of our current inventory.  The cost to set diamonds not purchased from our company will be based upon the size of the diamonds and the quality in accordance with the cost of our insurance to set those diamonds.  Pricing is based on a center stone weighing up to one carat, larger sizes will cost more.  Pricing is approximate and subject to change without notice due to market fluctuations.  Prices are for a standard U.S. size six ring, larger sizes will cost more.  14k versions usually available within 24 - 48 hours of order Monday through Friday, Platinum and 18k versions may require special order ( 7 to 10 working days on average) but contact us for availibility.